• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

You might need the key fob to be programmed by an automotive locksmith or lost subaru car keys dealer, based on the age of your subaru car keys is. This is typically done by connecting a machine for programming to the computer in the vehicle.

To program your Subaru begin by opening the driver's doors using the door button control, and then shut it. You will hear a chime and see the dome lights flashing in the instrument panel.

Step 1: Locate the circuit board of your transmitter

There are many ways to program your key fob. First, you need to determine the type of key fob that you own. This can be accomplished by examining the shape of the key fob, or by listening for a siren in your car.

Once you have this information, you can begin the process of programming your key fob at home. You will need an aluminum flathead and a key for this. You can open the key fob by twisting. Then push the key in and pull the battery from the tiny tabs that hold it in place. Replace the battery with a new one and put the key fob case back together.

Step 2 Step 2: Unscrew your Key Fob Case

It is recommended to replace the battery of key fobs if they aren't working. However, there are some cases where the buttons in the key fob might be broken. If you notice that the contacts made of metal on the button are loose Try soldering them back into place again in order to make them function properly.

Be sure to turn off your ignition and close your doors prior to you begin. Close the driver's side door and then press your button 10 times in rapid succession. Then, you should hear the instrument panel chime and your dome lights will blink. This indicates you're now ready to proceed.

Step 3: Insert the key fob into the ignition

There are many articles online that will give you steps on how to program a replacement key subaru or new Subaru key fob at home, but they are not very specific. A professional auto dealer or locksmith in Fort Bliss is the best alternative for reprogramming a digital car key.

Sit in the driver's seat of your Subaru Keys Lost with the engine off and the doors shut. You can open the door button control and use it to unlock all doors. Open and close the driver's door two times more. Insert and remove the ignition key (don't rotate it) 10 times in 40 seconds. The system should chirp to confirm that the settings have been modified.

Step 4 Step 4: Switch on the ignition

Before proceeding with this method of key fob programming, it is important to remember that this method works only when you have a working key already. If not, then a dealership or auto locksmith will be required to program a brand new key for your Subaru in Fort Bliss.

Once the key is programmed, it will be able to start your vehicle in about 5 seconds. To begin, make sure all doors are closed and the engine is off. Next, get in the driver's seat and open all doors using the door button control. Insert the key into the ignition, turn it on to the first position (the electrical systems will turn on but the engine remains off) then turn it back to the off position 10 times in rapid succession.

Step 5 5. Unlock the Driver's Door

Subaru offers a variety of high-end automobiles equipped with key fobs that lock and unlock doors, start the engine, and defrost windows. However, at times, these devices do not function properly.

To resolve the issue, you should contact an auto locksmith or dealer. This will resolve the issue and make sure that your car is safe.

To accomplish this, open the driver's doors and close it. Then, put the ignition key in and change it to the off position. Then, turn it back to the off position. Do this as quickly as you can, ten times. After the tenth time, you should hear a sound.

Step 6 Step 6: Press the Lock/Unlock key on the driver's Door

The procedure to replace a battery in a Subaru remote key fob is easy. Unlock the exterior fob case. Use a flathead to pry the casing open inside and then remove the old batteries.

After you have removed the old battery, insert the new one and close the case. Assume a seat in the driver's chair and open all doors with the door button control. Put the key in the ignition and turn the key to ensure that the electrical system is turned on, but the engine is off. Repeat this ten times in a row until you hear the chime coming from the instrument panel. This will put the system into programming mode.

Step 7: Press the Passenger Door Lock/Unlock button.

The annoying chirp which can be heard when you lock or unlock a Subaru Key Fob from outside of the vehicle can be a distraction for certain owners. In certain situations you can deactivate the chirp by closing and opening all doors by double-clicking the lock button on your key fob.

Switch the ignition off and shut all the doors as well as the lid that holds the fuel. Press and hold the lock side of the key fob's lock button for 10 seconds. The instrument panel emits a chime after this is accomplished. The chime signals that the door and fuel-filler lid are locked. It is possible to change the setting so that the doors lock automatically without pressing a button.

Step 8: Enter the 8-Digit Transmitter Number.

Note down the first series of 8-digits and keep it handy. Now, climb into the driver's seat, close the doors and turn the key to the first position. After 10 turns, the instrument panel should chime once.

The circuit board for transmitters is within the key fob case. The circuit board should have one or two 8-digit numbers. Follow the steps in the guide to register the code. For older models, this procedure might require a visit to the dealer.