• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

You may need the key fob to be programmed by an automotive locksmith or subaru impreza replacement key dealer, based on the age of your Subaru is. This is accomplished by connecting a computer machine to your car.

To program your Subaru car, you must open the driver's door by pressing the door button and close it. You will hear the chime sound and see the dome lights blink in the instrument panel.

Step 1: Find the Transmitter Circuit Board

There are a few different ways to program your key fob. It is first necessary to identify the kind of key fob you have. This can be done by examining the shape of the key fob or by listening to the buzz in your car.

Once you have these details, you are able to start the process of programming your key fob from home. You'll require an flathead and a steel key to accomplish this. Open the key fob by twisting it. Insert the key made of metal into the case and let go of the battery by pressing the tabs that hold it in place. Replace the battery and put the case back together.

Step 2 2. Unscrew the Key Fob Case

It is an ideal idea to change the batteries in key fobs in case they're not functioning. In some instances buttons on the key fob might be broken. If you notice the metal contacts on the button have been damaged You can try reconnecting them to make them work again.

Make sure that you shut off your ignition and close your doors prior to you begin. You can do this by closing your driver's door and pressing the door button ten times in rapid sequence. Then, you'll hear the instrument panel chime, and your dome lights should flash. This means you're ready to proceed.

Step 3: Insert the key fob into the ignition

A lot of articles on the internet will tell you how to program your new or Replacement Subaru Key subaru key programming keyfob at home. But, the majority of them do not give very specific instructions. Reprogramming an electronic lock is best handled by an experienced auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat of your Subaru with the engine off and the doors shut. You can open the door button control and use it to unlock all doors. Open and close the driver’s door three times. After that, insert and remove your key from the ignition switch (don't turn it) 10 times within 40 seconds. The system will chirp if the settings are changed.

Step 4 4. Turn on the ignition.

It is essential to realize that this method of programming a key fob works if you already have a functioning key. If you don't then a dealer or auto locksmith will be required to program a brand new key for your subaru transponder key in Fort Bliss.

Once the key has been programmed, it will be capable of starting your car within about five minutes. Start by closing all doors, then turning off the engine. Then, sit in the driver's seat and open all doors with the door button control. Insert the key into the ignition then turn it on to the first position (the electrical systems will come on, but the engine will remain off), and then back to the off position ten times in rapid succession.

Step 5: Unlock Driver's Door

Subaru offers a variety of high-end cars with key fobs which lock and unlock doors, turn on the engine, and even defrost windows. These gadgets can sometimes stop functioning.

Contact a locksmith or dealer to resolve the issue. This will solve the issue and ensure that your vehicle is secure.

First, you must open and close the driver's door. Then, place the ignition key and turn it to the first position. Then, return it to the off position. Repeat this ten times in an order as fast as you can. After the tenth repetition you should hear a chime.

Step 6 Step 6: Press the Lock/Unlock button on the Driver's Door

If you're looking to replace the battery inside the subaru keys lost key fob, the procedure is easy. First, open the exterior fob casing. Then make use of the flathead screwdriver open the inside of the case and remove the old battery.

After removing the battery, put in the new one and close the case. Next, sit in the driver's chair and unlock all doors using the door button control. Then, put the key in the ignition and turn it so that the electrical systems are powered on, but the engine is off. Repeat this 10 times in a row until you hear the chime on the instrument panel. This will put the system into programming mode.

Step 7 Step 7: Press the Lock/Unlock Button on the Passenger's Door

For certain owners, the irritating noise that occurs when locking and unlocking the Subaru key fob from outside can become distracting. In some instances, the chirp can be removed by closing and opening all doors and a double click of the lock button on the key fob.

Close all doors, including the lid that holds the fuel, and turn off the ignition. For 10 seconds then press and hold the lock button on the key fob. After that the instrument panel will emit an audible chime. The chirp indicates that the lid for the fuel-filler and door are locked. It is possible to change the setting to make the doors lock automatically without pressing a switch.

Step 8: Enter the 8-Digit Transmitter Number

Note down the first series of 8 digits and keep it in your wallet. Now, get in your driver's seat, shut all of the doors, and turn the ignition to the first position (towards on). After 10 turns, your instrument panel should sound at least once.

Then, you need to open the key fob case and locate the circuit board of the transmitter inside. The circuit board will have one or two 8-digit numbers. Take note of the first sequence of numbers, and follow the steps in this guide to register the code on your vehicle's system. This process may require visiting the dealer for older models.